Sell S690QL steel
EN 10025-6S690QL high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.
Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm
S690QL delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
S690QL steel material can be produced asS690QL steel plate, S690QL steel sheet, S690QL steel bar, S690QL section steel, S690QL structural shapes
Key words: S690QL high strength low alloy steel plates, S690QL stock, S690QL competitive price, S690QL high quality, S690QL supplier, S690QL manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月30日星期日
Sell S690Q steel
EN 10025-6S690Qhigh strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.
Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm
S690Q delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
S690Q steel material can be produced asS690Q steel plate, S690Q steel sheet, S690Q steel bar, S690Q section steel, S690Q structural shapes
Key words: S690Q high strength low alloy steel plates, S690Q stock, S690Q competitive price, S690Q high quality, S690Q supplier, S690Q manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
EN 10025-6S690Qhigh strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.
Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm
S690Q delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
S690Q steel material can be produced asS690Q steel plate, S690Q steel sheet, S690Q steel bar, S690Q section steel, S690Q structural shapes
Key words: S690Q high strength low alloy steel plates, S690Q stock, S690Q competitive price, S690Q high quality, S690Q supplier, S690Q manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell S620QL1 steel
EN 10025-6SS620QL1 high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.
Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm
S620QL1 delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
S620QL1 steel material can be produced as S620QL1 steel plate, S620QL1 steel sheet, S620QL1 steel bar, S620QL1 section steel, S620QL1 structural shapes
Key words: S620QL1 high strength low alloy steel plates, S620QL1 stock, S620QL1 competitive price, S620QL1 high quality, S620QL1 supplier, S620QL1 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
EN 10025-6SS620QL1 high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.
Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm
S620QL1 delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
S620QL1 steel material can be produced as S620QL1 steel plate, S620QL1 steel sheet, S620QL1 steel bar, S620QL1 section steel, S620QL1 structural shapes
Key words: S620QL1 high strength low alloy steel plates, S620QL1 stock, S620QL1 competitive price, S620QL1 high quality, S620QL1 supplier, S620QL1 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell S620Q steel
EN 10025-6S620Q high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.
Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm
S620Q delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
S620Q steel material can be produced as S620Q steel plate, S620Q steel sheet, S620Q steel bar, S620Q section steel, S620Q structural shapes
Key words: S620Q high strength low alloy steel plates, S620Q stock, S620Q competitive price, S620Q high quality, S620Q supplier, S620Q manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
EN 10025-6S620Q high strength low alloy steel plates are mainly made mechanical device and other structural elements and so on drilling machine, power shovel, electricity drive wheel counter- mine trolley, mineral product automobile, car loader.
Rolling range: Thickness*Width*Length 6-450mm*1500-4200mm*5000-18000mm
S620Q delivery Condition: Hot Rolled,CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
S620Q steel material can be produced as S620Q steel plate, S620Q steel sheet, S620Q steel bar, S620Q section steel, S620Q structural shapes
Key words: S620Q high strength low alloy steel plates, S620Q stock, S620Q competitive price, S620Q high quality, S620Q supplier, S620Q manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell 51CrV4 steel
BS EN 10083-51CrV4 structural alloy steel
51CrV4 structural alloy steel is used for mechanical parts and all kinds of engineering components and contains one or several kinds of alloy element in steel,51CrV4 Alloy structural steel is widely used in ships, vehicles, aircraft, missiles, weapons, railways, Bridges, pressure vessels and so on.
Key words:BS EN 10083-51CrV4,51CrV4 structural alloy steel.51CrV4 structural alloy steel plate,51CrV4 structural alloy steel plate sheet, 51CrV4 stock, 51CrV4 competitive price, 51CrV4 high quality, 51CrV4 supplier, 51CrV4 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
BS EN 10083-51CrV4 structural alloy steel
51CrV4 structural alloy steel is used for mechanical parts and all kinds of engineering components and contains one or several kinds of alloy element in steel,51CrV4 Alloy structural steel is widely used in ships, vehicles, aircraft, missiles, weapons, railways, Bridges, pressure vessels and so on.
Key words:BS EN 10083-51CrV4,51CrV4 structural alloy steel.51CrV4 structural alloy steel plate,51CrV4 structural alloy steel plate sheet, 51CrV4 stock, 51CrV4 competitive price, 51CrV4 high quality, 51CrV4 supplier, 51CrV4 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
vivian@steel-jw.comSkype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月26日星期三
Sell S460N steel
S460N are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S460N Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S460N Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S460N, S460N low alloy steel,S460N high strength steel, EN10025-S460N low alloy and high strength steel plate，S460N stock, S460N competitive price, S460N high quality, S460N supplier, S460N manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
S460N are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S460N Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S460N Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S460N, S460N low alloy steel,S460N high strength steel, EN10025-S460N low alloy and high strength steel plate，S460N stock, S460N competitive price, S460N high quality, S460N supplier, S460N manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell S420NL steel
S420NL are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S420NL Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S420NL Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S420NL, S420NL low alloy steel,S420NL high strength steel, EN10025-S420NL low alloy and high strength steel plate，S420NL stock, S420NL competitive price, S420NL high quality, S420NL supplier, S420NL manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
S420NL are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S420NL Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S420NL Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S420NL, S420NL low alloy steel,S420NL high strength steel, EN10025-S420NL low alloy and high strength steel plate，S420NL stock, S420NL competitive price, S420NL high quality, S420NL supplier, S420NL manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell S420N steel
S420N are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S420N Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S420N Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S420N, S420N low alloy steel,S420N high strength steel, EN10025-S420N low alloy and high strength steel plate, S420N stock, S420N competitive price, S420N high quality, S420N supplier, S420N manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
S420N are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S420N Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S420N Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S420N, S420N low alloy steel,S420N high strength steel, EN10025-S420N low alloy and high strength steel plate, S420N stock, S420N competitive price, S420N high quality, S420N supplier, S420N manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell S355N steel
S355N are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S355N Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S355N Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S355N, S355N low alloy steel,S355N high strength steel, EN10025-S355N low alloy and high strength steel plate, S355N stock, S355N competitive price, S355N high quality, S355N supplier, S355N manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
S355N are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S355N Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S355N Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S355N, S355N low alloy steel,S355N high strength steel, EN10025-S355N low alloy and high strength steel plate, S355N stock, S355N competitive price, S355N high quality, S355N supplier, S355N manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell S355NL steel
S355NL are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S355NL Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S355NL Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S355NL, S355NL low alloy steel,S355NL high strength steel, EN10025-S355NL low alloy and high strength steel plate, S355NL stock, S355NL competitive price, S355NL high quality, S355NL supplier, S355NL manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
S355NL are used to manufacture the plants of factory ,the common constructure and construction machinery and equipment; for example:Drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of Chain Block, and other machiney equipments.
S355NL Rolling Range (T*W*L): 6-300mm*1500-4020mm*3000-18000mm
S355NL Additional processing: CNC Cutting (Laser,Flame,Plasma),welding,Shoting Blasting and Painting.
Key words:EN10025-S355NL, S355NL low alloy steel,S355NL high strength steel, EN10025-S355NL low alloy and high strength steel plate, S355NL stock, S355NL competitive price, S355NL high quality, S355NL supplier, S355NL manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月25日星期二
Sell S355J2G1W steel
S355J2G1W is very popular steel grades in weathering resistant steel in the European standard .Their resistant performance is better than the common welding structural steel.
Key words: S355J2G1W stock, S355J2G1W competitive price, S355J2G1W high quality, S355J2G1Wsupplier, S355J2G1W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
S355J2G1W is very popular steel grades in weathering resistant steel in the European standard .Their resistant performance is better than the common welding structural steel.
Key words: S355J2G1W stock, S355J2G1W competitive price, S355J2G1W high quality, S355J2G1Wsupplier, S355J2G1W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Sell S355J2 steel
BS EN10025-2 S355J2 non-alloy super heavy steel plate
BS EN10025-2 S355J2 is a kind of non-alloy structure steel . BS EN10025-2 series steel grades include : S235JR(J0,J2) S275JR(J0,J2) S355JR(J0,J2) S355JR(J0,J2,K2) S450J0. BS EN10025-2 series steel grade is a kind of common carbon structural steel, can be used in constructional , tank, building , bridge, machine . The material BS EN10025-2 S355J2 we offer is super heavy steel plate , and the thickness can reach 600mm .
Key words: S355J2 non-alloy structure steel, S355J2 stock, S355J2 competitive price, S355J2 high quality, S355J2 supplier, S355J2 manufacturer.
Standard: BS EN10025-2
MOQ: 1 PC
Services of Steel: Cutting, Welding, Z15, Z25, Z35, Qt, N, Q, A, Painting Flaw-Detection Grade1, Flaw-Detection Grade2, Flaw-Detection.
Symbols used in EN 10025-2 : 2004 Non-alloy structural steels
S... - Structural steel
E... - Engineering steel;
235... - Minimum yield strength (ReH) in MPa at 16mm;
JR.. - Longitudinal Charpy V-notch impacts 27 J at + 20°C;
J0.. - Longitudinal Charpy V-notch impacts 27 J at 0°C;
J2.. - Longitudinal Charpy V-notch impacts 27 J at - 20°C;
K2.. - Longitudinal Charpy V-notch impacts 40 J at - 20°C;
+AR - Supply in as rolled conditions ;
+N - Supply in normalized/normalized rolled conditions.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
BS EN10025-2 S355J2 non-alloy super heavy steel plate
BS EN10025-2 S355J2 is a kind of non-alloy structure steel . BS EN10025-2 series steel grades include : S235JR(J0,J2) S275JR(J0,J2) S355JR(J0,J2) S355JR(J0,J2,K2) S450J0. BS EN10025-2 series steel grade is a kind of common carbon structural steel, can be used in constructional , tank, building , bridge, machine . The material BS EN10025-2 S355J2 we offer is super heavy steel plate , and the thickness can reach 600mm .
Key words: S355J2 non-alloy structure steel, S355J2 stock, S355J2 competitive price, S355J2 high quality, S355J2 supplier, S355J2 manufacturer.
Standard: BS EN10025-2
MOQ: 1 PC
Services of Steel: Cutting, Welding, Z15, Z25, Z35, Qt, N, Q, A, Painting Flaw-Detection Grade1, Flaw-Detection Grade2, Flaw-Detection.
Symbols used in EN 10025-2 : 2004 Non-alloy structural steels
S... - Structural steel
E... - Engineering steel;
235... - Minimum yield strength (ReH) in MPa at 16mm;
JR.. - Longitudinal Charpy V-notch impacts 27 J at + 20°C;
J0.. - Longitudinal Charpy V-notch impacts 27 J at 0°C;
J2.. - Longitudinal Charpy V-notch impacts 27 J at - 20°C;
K2.. - Longitudinal Charpy V-notch impacts 40 J at - 20°C;
+AR - Supply in as rolled conditions ;
+N - Supply in normalized/normalized rolled conditions.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Sell S355J0WP steel
S355J0WP steel is a kind of improved atmospheric corrosion resistance steel. Improved atmospheric corrosion resistance steel means weathering steel or atmosphere corrosion resistance steel. The material No. Of S355J0WP is 1.8945
EN 10025-5 S355J0WP steel material can be produced into S355J0WP steel sheet, S355J0WP steel plate ,S355J0WP section steel
Key words: S355J0WP stock, S355J0WP competitive price, S355J0WP high quality, S355J0WP supplier, S355J0WP manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
S355J0WP steel is a kind of improved atmospheric corrosion resistance steel. Improved atmospheric corrosion resistance steel means weathering steel or atmosphere corrosion resistance steel. The material No. Of S355J0WP is 1.8945
EN 10025-5 S355J0WP steel material can be produced into S355J0WP steel sheet, S355J0WP steel plate ,S355J0WP section steel
Key words: S355J0WP stock, S355J0WP competitive price, S355J0WP high quality, S355J0WP supplier, S355J0WP manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
sell S355J0 steel
BS EN10025-2 S355J0 non-alloy common carbon structure steel
BS EN10025-2 S355J0 is a kind of non-alloy structure steel . BS EN10025-2 series steel grades include : S235JR(J0,J2) S275JR(J0,J2) S355JR(J0,J2) S355JR(J0,J2,K2) S450J0. BS EN10025-2 series steel grade is a kind of common carbon structural steel, can be used in constructional , tank, building , bridge, machine .
Key words: S355J0 non-alloy structure steel, S355J0 stock, S355J0 competitive price, S355J0 high quality, S355J0 supplier, S355J0 manufacturer.
Standard: BS EN10025-2
MOQ: 1 PC
Services of Steel: Cutting, Welding, Z15, Z25, Z35, Qt, N, Q, A, Painting Flaw-Detection Grade1, Flaw-Detection Grade2, Flaw-Detection.
Symbols used in EN 10025-2 : 2004 Non-alloy structural steels
S... - Structural steel
E... - Engineering steel;
235... - Minimum yield strength (ReH) in MPa at 16mm;
JR.. - Longitudinal Charpy V-notch impacts 27 J at + 20°C;
J0.. - Longitudinal Charpy V-notch impacts 27 J at 0°C;
J2.. - Longitudinal Charpy V-notch impacts 27 J at - 20°C;
K2.. - Longitudinal Charpy V-notch impacts 40 J at - 20°C;
+AR - Supply in as rolled conditions ;
+N - Supply in normalized/normalized rolled conditions.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
BS EN10025-2 S355J0 non-alloy common carbon structure steel
BS EN10025-2 S355J0 is a kind of non-alloy structure steel . BS EN10025-2 series steel grades include : S235JR(J0,J2) S275JR(J0,J2) S355JR(J0,J2) S355JR(J0,J2,K2) S450J0. BS EN10025-2 series steel grade is a kind of common carbon structural steel, can be used in constructional , tank, building , bridge, machine .
Key words: S355J0 non-alloy structure steel, S355J0 stock, S355J0 competitive price, S355J0 high quality, S355J0 supplier, S355J0 manufacturer.
Standard: BS EN10025-2
MOQ: 1 PC
Services of Steel: Cutting, Welding, Z15, Z25, Z35, Qt, N, Q, A, Painting Flaw-Detection Grade1, Flaw-Detection Grade2, Flaw-Detection.
Symbols used in EN 10025-2 : 2004 Non-alloy structural steels
S... - Structural steel
E... - Engineering steel;
235... - Minimum yield strength (ReH) in MPa at 16mm;
JR.. - Longitudinal Charpy V-notch impacts 27 J at + 20°C;
J0.. - Longitudinal Charpy V-notch impacts 27 J at 0°C;
J2.. - Longitudinal Charpy V-notch impacts 27 J at - 20°C;
K2.. - Longitudinal Charpy V-notch impacts 40 J at - 20°C;
+AR - Supply in as rolled conditions ;
+N - Supply in normalized/normalized rolled conditions.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
2014年11月24日星期一
Sell S355JR steel
BS EN10025-2 S355JR Non-alloy structure steel
BS EN10025-2 S355JR is a kind of non-alloy structure steel . BS EN10025-2 series steel grades include : S235JR(J0,J2) S275JR(J0,J2) S355JR(J0,J2) S355JR(J0,J2,K2) S450J0. BS EN10025-2 series steel grade is a kind of common carbon structural steel, can be used in constructional , tank, building , bridge, machine .
Key words: S355JR non-alloy structure steel, S355JR stock, S355JR competitive price, S355JR high quality, S355JR supplier, S355JR manufacturer.
Standard: BS EN10025-2
MOQ: 1 PC
Services of Steel: Cutting, Welding, Z15, Z25, Z35, Qt, N, Q, A, Painting Flaw-Detection Grade1, Flaw-Detection Grade2, Flaw-Detection.
Symbols used in EN 10025-2 : 2004 Non-alloy structural steels
S... - Structural steel
E... - Engineering steel;
235... - Minimum yield strength (ReH) in MPa at 16mm;
JR.. - Longitudinal Charpy V-notch impacts 27 J at + 20°C;
J0.. - Longitudinal Charpy V-notch impacts 27 J at 0°C;
J2.. - Longitudinal Charpy V-notch impacts 27 J at - 20°C;
K2.. - Longitudinal Charpy V-notch impacts 40 J at - 20°C;
+AR - Supply in as rolled conditions ;
+N - Supply in normalized/normalized rolled conditions.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A573 Grade 70 steel
ASTM Grade A573 Grade 70 is a kind of common carbon structure steel plates. Steel grade Grade A573 Grade 70 is common used in carbon steel plate with improved toughness. About mechanical property for carbon steel plate Grade A573 Grade 70, the minimum yield strength shall above 220 Mpa and tensile strength shall within 400-490 Mpa.Main application of ASTM Grade A573 Grade 70 is firstly and largely producing structural parts of the bolted and welded steel industrial area.
Steel Standard: ASTM A 573/A573M
Steel Grade: SA573 Grade 70
Key words: Grade A573 Grade 70, Grade A573 Grade 70 common carbon structure steel plates, Grade A573 Grade 70 welded steel, Grade A573 Grade 70 competitive price, Grade A573 Grade 70 high quality, Grade A573 Grade 70 best service, responsible supplier, Grade A573 Grade 70 good manufacturer.
Thickness: 2mm-650mm
Width: 1200mm-4200mm
Length: 3000mm-18000mm
Surface Treatment: Shot blasting and painting or coated
The minimum order quantity of our Grade A573 Grade 70 is 1 PC.
Product type: Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SM490C steel
Standard: JIS G3106
SM490C dimension range: 1.5mm -620mmx1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our SM490C is 1 PC
Key words: SM490C, SM490C building, SM490C bridge, SM490C ship, SM490C automobile, SM490C petroleum container, SM490C construction vehicles, SM490C competitive price, SM490C high quality, SM490C best service, SM490C responsible supplier, SM490C good manufacturer
SM490C Specification:
SM490C steel is used for the structure part with high requirement of mechanical property and welding performance in building, bridge, ship , automobile, petroleum container and construction vehicles.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SM490B steel
Standard: JIS G3106
SM490B dimension range: 1.5mm -620mmx1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our SM490Bis 1 PC
Key words: SM490B, SM490B building, SM490B bridge, SM490B ship, SM490B automobile, SM490B petroleum container, SM490B construction vehicles, SM490B competitive price, SM490B high quality, SM490B best service, SM490B responsible supplier, SM490B good manufacturer
SM490B Specification:
SM490B steel is used for the structure part with high requirement of mechanical property and welding performance in building, bridge, ship , automobile, petroleum container and construction vehicles.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SM490A steel
Standard: JIS G3106
SM490A dimension range: 1.5mm -620mmx1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our SM490A is 1 PC
SM490A Specification:
SM490A l steel is used for the structure part with high requirement of mechanical property and welding performance in building, bridge, ship , automobile, petroleum container and construction vehicles.
Key words: SM490A, SM490A building, SM490A bridge, SM490A ship, SM490A automobile, SM490A petroleum container, SM490A construction vehicles, SM490A competitive price, SM490A high quality, SM490A best service, SM490A responsible supplier, SM490A good manufacturer
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SM400C steel
Standard: JIS G3106
SM400C dimension range: 1.5mm -620mmx1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our SM400C is 1 PC
SM400C Specification:
Welding structural steel is used for the structure part with high requirement of mechanical property and welding performance in building, bridge, ship , automobile, petroleum container and construction vehicles.
Key words: SM400C, SM400C building, SM400C bridge, SM400C ship, SM400C automobile, SM400C petroleum container, SM400C construction vehicles, SM400C competitive price, SM400C high quality, SM400C best service, SM400C responsible supplier, SM400C good manufacturer
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月23日星期日
Sell St44-2 steel
Specification:
DIN17100 series steel grades include: USt37-2, RSt37-2, St37-2, St37-3, St44-2, St44-3, St52-3, St50-2, St60-2, and St70-2. DIN17100 series steel grade is a kind of common structural steel, can be used in constructional, tank, building, bridge, machine......
Key words: St44-2, St44-2 common structural steel, St44-2 constructional, St44-2 tank, St44-2 building, St44-2 bridge, St44-2 machine, St44-2 competitive price, St44-2 high quality, St44-2 best service, St44-2 responsible supplier, St44-2 good manufacturer.
Standard: DIN17100 DIN-EN
St44-2 dimension range: 1.5 mm -680mm x 1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our St44-2 is 1 PC
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Specification:
DIN17100 series steel grades include: USt37-2, RSt37-2, St37-2, St37-3, St44-2, St44-3, St52-3, St50-2, St60-2, and St70-2. DIN17100 series steel grade is a kind of common structural steel, can be used in constructional, tank, building, bridge, machine......
Key words: St44-2, St44-2 common structural steel, St44-2 constructional, St44-2 tank, St44-2 building, St44-2 bridge, St44-2 machine, St44-2 competitive price, St44-2 high quality, St44-2 best service, St44-2 responsible supplier, St44-2 good manufacturer.
Standard: DIN17100 DIN-EN
St44-2 dimension range: 1.5 mm -680mm x 1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our St44-2 is 1 PC
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell St37-3 steel
Specification:
DIN17100 series steel grades include: USt37-2, RSt37-2, St37-2, St37-3, St44-2, St44-3, St52-3, St50-2, St60-2, and St70-2. DIN17100 series steel grade is a kind of common structural steel, can be used in constructional, tank, building, bridge, machine......
Key words: St37-3, St37-3 common structural steel, St37-3 constructional, St37-3 tank, St37-3 building, St37-3 bridge, St37-3 machine, St37-3 competitive price, St37-3 high quality, St37-3 best service, St37-3 responsible supplier, St37-3 good manufacturer.
Standard: DIN17100 DIN-EN
St37-3 dimension range: 1.5 mm -680mm x 1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our St37-3 is 1 PC
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Specification:
DIN17100 series steel grades include: USt37-2, RSt37-2, St37-2, St37-3, St44-2, St44-3, St52-3, St50-2, St60-2, and St70-2. DIN17100 series steel grade is a kind of common structural steel, can be used in constructional, tank, building, bridge, machine......
Key words: St37-3, St37-3 common structural steel, St37-3 constructional, St37-3 tank, St37-3 building, St37-3 bridge, St37-3 machine, St37-3 competitive price, St37-3 high quality, St37-3 best service, St37-3 responsible supplier, St37-3 good manufacturer.
Standard: DIN17100 DIN-EN
St37-3 dimension range: 1.5 mm -680mm x 1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our St37-3 is 1 PC
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell USt37-2 steel
USt37-2 Specification:
DIN17100 series steel grades include: USt37-2, RSt37-2, St37-2, St37-3, St44-2, St44-3, St52-3, St50-2, St60-2, and St70-2. USt37-2steel grade is a kind of common structural steel, can be used in constructional, tank, building, bridge, machine......
Key words: USt37-2, USt37-2 common structural steel, USt37-2 constructional, USt37-2 tank, USt37-2 building, USt37-2 bridge, USt37-2 machine, USt37-2 competitive price, USt37-2 high quality, USt37-2 best service, USt37-2 responsible supplier, USt37-2 good manufacturer.
Standard: DIN17100 DIN-EN
USt37-2 dimension range: 1.5 mm -680mmx1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our USt37-2 is1 PC
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
USt37-2 Specification:
DIN17100 series steel grades include: USt37-2, RSt37-2, St37-2, St37-3, St44-2, St44-3, St52-3, St50-2, St60-2, and St70-2. USt37-2steel grade is a kind of common structural steel, can be used in constructional, tank, building, bridge, machine......
Key words: USt37-2, USt37-2 common structural steel, USt37-2 constructional, USt37-2 tank, USt37-2 building, USt37-2 bridge, USt37-2 machine, USt37-2 competitive price, USt37-2 high quality, USt37-2 best service, USt37-2 responsible supplier, USt37-2 good manufacturer.
Standard: DIN17100 DIN-EN
USt37-2 dimension range: 1.5 mm -680mmx1000mm-4000mm x 1000mm-18000mm
The minimum order quantity of our USt37-2 is1 PC
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell ST 37-2 steel
ST 37-2 steel plate, under DIN17100 standard ST 37-2 steel plate, under DIN17100 standard, we can regard ST 37-2 steel plate as common carbon structural steel. ST 37-2 steel plate is one mainly of Carbon structural steel, ST 37-2 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet. Material ST 37-2 we can offer you is super heavy steel plate, and the thickness can reach as much as 600mm .
Standard: DIN17100
Key words: ST 37-2, ST 37-2 steel plate as common carbon structural steel, ST 37-2 Carbon structural steel, ST 37-2 is a type of steel sheet, ST 37-2 competitive price, ST 37-2 high quality, ST 37-2 best service, ST 37-2 responsible supplier, ST 37-2 good manufacturer, ST 37-2 Non-alloy steel
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ST 37-2 steel plate, under DIN17100 standard ST 37-2 steel plate, under DIN17100 standard, we can regard ST 37-2 steel plate as common carbon structural steel. ST 37-2 steel plate is one mainly of Carbon structural steel, ST 37-2 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet. Material ST 37-2 we can offer you is super heavy steel plate, and the thickness can reach as much as 600mm .
Standard: DIN17100
Key words: ST 37-2, ST 37-2 steel plate as common carbon structural steel, ST 37-2 Carbon structural steel, ST 37-2 is a type of steel sheet, ST 37-2 competitive price, ST 37-2 high quality, ST 37-2 best service, ST 37-2 responsible supplier, ST 37-2 good manufacturer, ST 37-2 Non-alloy steel
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月20日星期四
Sell P460QH steel
EN10028 P460QH alloy steel plate
Key words:EN10028 P460QH, EN10028 P460QH alloy steel,P460QH steel plate/sheet,P460QH for pressure vessels,P460QH capacitor plate, EN10028 P460QH Stock, EN10028 P460QH competitive price, EN10028 P460QH high quality, EN10028 P460QH best service, EN10028 P460QH responsible supplier, EN10028 P460QH good manufacturer.
P460QH Used in petroleum, chemical industry, power station, boiler, etc, P460QH used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel and boiler steam drum bottle steam, liquefied petroleum, hydropower station high pressure hose, spiral case and other equipment and components
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
EN10028 P460QH alloy steel plate
Key words:EN10028 P460QH, EN10028 P460QH alloy steel,P460QH steel plate/sheet,P460QH for pressure vessels,P460QH capacitor plate, EN10028 P460QH Stock, EN10028 P460QH competitive price, EN10028 P460QH high quality, EN10028 P460QH best service, EN10028 P460QH responsible supplier, EN10028 P460QH good manufacturer.
P460QH Used in petroleum, chemical industry, power station, boiler, etc, P460QH used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel and boiler steam drum bottle steam, liquefied petroleum, hydropower station high pressure hose, spiral case and other equipment and components
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell P355QH steel
EN10028 P355QH alloy steel plate
Key words:EN10028 P355QH, EN10028 P355QH alloy steel,P355QH steel plate/sheet,P355QH for pressure vessels,P355QH capacitor plate
P355QH Used in petroleum, chemical industry, power station, boiler, etc, P355QH used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel and boiler steam drum bottle steam, liquefied petroleum, hydropower station high pressure hose, spiral case and other equipment and components
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
EN10028 P355QH alloy steel plate
Key words:EN10028 P355QH, EN10028 P355QH alloy steel,P355QH steel plate/sheet,P355QH for pressure vessels,P355QH capacitor plate
P355QH Used in petroleum, chemical industry, power station, boiler, etc, P355QH used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel and boiler steam drum bottle steam, liquefied petroleum, hydropower station high pressure hose, spiral case and other equipment and components
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell P355NH steel
EN10028-2:2003 P355NH alloy steel
Key words:EN10028-2:2003 P355NH, EN10028-2:2003 P355NH alloy steel,P355NH steel plate/sheet,P355NH for pressure vessels,P355NH capacitor plate
P355GH Used in petroleum, chemical industry, power station, boiler, etc, P355GH used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel and boiler steam drum bottle steam, liquefied petroleum, hydropower station high pressure hose, spiral case and other equipment and components
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
EN10028-2:2003 P355NH alloy steel
Key words:EN10028-2:2003 P355NH, EN10028-2:2003 P355NH alloy steel,P355NH steel plate/sheet,P355NH for pressure vessels,P355NH capacitor plate
P355GH Used in petroleum, chemical industry, power station, boiler, etc, P355GH used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel and boiler steam drum bottle steam, liquefied petroleum, hydropower station high pressure hose, spiral case and other equipment and components
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell P355GH steel
EN10028-2:2003 P355GH alloy steel
Key words:EN10028-2:2003P355GH, EN10028-2:2003 P355GH alloy steel,P355GH steel plate/sheet,P355GH for pressure vessels,P335GH capacitor plate
P355GH has good plasticity and toughness, cold bending property and welding performance. P355GH Suitable for manufacturing nuclear steel containment vessel, pressure vessels, equipment structure and so on.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
EN10028-2:2003 P355GH alloy steel
Key words:EN10028-2:2003P355GH, EN10028-2:2003 P355GH alloy steel,P355GH steel plate/sheet,P355GH for pressure vessels,P335GH capacitor plate
P355GH has good plasticity and toughness, cold bending property and welding performance. P355GH Suitable for manufacturing nuclear steel containment vessel, pressure vessels, equipment structure and so on.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月19日星期三
Sell A302 Grade C steel
ASTM A302 Grade C steel plate grade specification covers molybdenum alloy, intended particularly of welded boilers and others pressure vessels steel plate in A302 Gr A, A302 Gr B , A 302 Gr C and A 302 Gr D.
ASTM A302 Grade C steel chief application:
ASTM A302 Grade C pressure vessel steel plate is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel, boiler steam drum steam, liquefied petroleum, hydropower station, high pressure pipe.
Key words: A302 Grade C molybdenum alloy, A302 Grade C stock, A302 Grade C competitive price, A302 Grade C high quality, A302 Grade C best service, A302 Grade C responsible supplier, A302 Grade C good manufacturer.
Standard: ASTM A-302/A-302M
Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASTM A302 Grade C steel plate grade specification covers molybdenum alloy, intended particularly of welded boilers and others pressure vessels steel plate in A302 Gr A, A302 Gr B , A 302 Gr C and A 302 Gr D.
ASTM A302 Grade C steel chief application:
ASTM A302 Grade C pressure vessel steel plate is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel, boiler steam drum steam, liquefied petroleum, hydropower station, high pressure pipe.
Key words: A302 Grade C molybdenum alloy, A302 Grade C stock, A302 Grade C competitive price, A302 Grade C high quality, A302 Grade C best service, A302 Grade C responsible supplier, A302 Grade C good manufacturer.
Standard: ASTM A-302/A-302M
Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A302 Grade B steel
ASTM A302 Grade B steel plate grade specification covers molybdenum alloy, intended particularly of welded boilers and others pressure vessels steel plate in A302 Gr A, A302 Gr B , A 302 Gr C and A 302 Gr D.
ASTM A302 Grade B steel chief application:
ASTM A302 Grade B pressure vessel steel plate is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel, boiler steam drum steam, liquefied petroleum, hydropower station, high pressure pipe.
Key words: A302 Grade B molybdenum alloy, A302 Grade B stock, A302 Grade B competitive price, A302 Grade B high quality, A302 Grade B best service, A302 Grade B responsible supplier, A302 Grade B good manufacturer.
Standard: ASTM A-302/A-302M
Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASTM A302 Grade B steel plate grade specification covers molybdenum alloy, intended particularly of welded boilers and others pressure vessels steel plate in A302 Gr A, A302 Gr B , A 302 Gr C and A 302 Gr D.
ASTM A302 Grade B steel chief application:
ASTM A302 Grade B pressure vessel steel plate is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel, boiler steam drum steam, liquefied petroleum, hydropower station, high pressure pipe.
Key words: A302 Grade B molybdenum alloy, A302 Grade B stock, A302 Grade B competitive price, A302 Grade B high quality, A302 Grade B best service, A302 Grade B responsible supplier, A302 Grade B good manufacturer.
Standard: ASTM A-302/A-302M
Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A302 Grade A steel
ASTM A302 Grade A steel plate grade specification covers molybdenum alloy, intended particularly of welded boilers and others pressure vessels steel plate in A302 Gr A, A302 Gr B , A 302 Gr C and A 302 Gr D.
ASTM A302 Grade A steel chief application:
ASTM A302 Grade A pressure vessel steel plate is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel, boiler steam drum steam, liquefied petroleum, hydropower station, high pressure pipe.
Key words: A302 Grade A molybdenum alloy, A302 Grade A stock, A302 Grade A competitive price, A302 Grade A high quality, A302 Grade A best service, A302 Grade A responsible supplier, A302 Grade A good manufacturer.
Standard: ASTM A-302/A-302M
Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASTM A302 Grade A steel plate grade specification covers molybdenum alloy, intended particularly of welded boilers and others pressure vessels steel plate in A302 Gr A, A302 Gr B , A 302 Gr C and A 302 Gr D.
ASTM A302 Grade A steel chief application:
ASTM A302 Grade A pressure vessel steel plate is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator, spherical tank, liquefied gas, nuclear reactor pressure vessel, boiler steam drum steam, liquefied petroleum, hydropower station, high pressure pipe.
Key words: A302 Grade A molybdenum alloy, A302 Grade A stock, A302 Grade A competitive price, A302 Grade A high quality, A302 Grade A best service, A302 Grade A responsible supplier, A302 Grade A good manufacturer.
Standard: ASTM A-302/A-302M
Dimension range :1.5mm -260mm x 1000mm-4000mm x 1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A299 steel
ASTM A299 is a kind of carbon steel material, it's product type is steel plates. Based on A299 higher C, Mn, and Si composition, ASTM A299 widely used to fabric pressure vessel.There are two steel grades in the standard ASTM A299 , and they are A299 Gr.A, A299 Gr.B .
Key words：ASTM A299 carbon steel material, ASTM A299 stock, ASTM A299 competitive price, ASTM A299 high quality, ASTM A299 best service, ASTM A299 responsible supplier, ASTM A299 good manufacturer
Standard: ASTM A299/ A299M
Thickness :1.5mm -260mm
Width :1000mm-4000mm
Length :1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASTM A299 is a kind of carbon steel material, it's product type is steel plates. Based on A299 higher C, Mn, and Si composition, ASTM A299 widely used to fabric pressure vessel.There are two steel grades in the standard ASTM A299 , and they are A299 Gr.A, A299 Gr.B .
Key words：ASTM A299 carbon steel material, ASTM A299 stock, ASTM A299 competitive price, ASTM A299 high quality, ASTM A299 best service, ASTM A299 responsible supplier, ASTM A299 good manufacturer
Standard: ASTM A299/ A299M
Thickness :1.5mm -260mm
Width :1000mm-4000mm
Length :1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SA299 steel
ASME SA299 is a kind of carbon steel material, it's product type is steel plates. Based on SA299 higher C, Mn, and Si composition, ASME SA299 widely used to fabric pressure vessel.There are two steel grades in the standard ASME SA299 , and they are SA299 Gr.A, SA299 Gr.B .
Key words: ASME SA299, ASME SA299 carbon steel material, ASME SA299 stock, ASME SA299 competitive price, ASME SA299 high quality, ASME SA299 best service, ASME SA299 responsible supplier, ASME SA299 good manufacturer
Standard: ASME SA299/ SA299M
Thickness :1.5mm -260mm
Width :1000mm-4000mm
Length :1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASME SA299 is a kind of carbon steel material, it's product type is steel plates. Based on SA299 higher C, Mn, and Si composition, ASME SA299 widely used to fabric pressure vessel.There are two steel grades in the standard ASME SA299 , and they are SA299 Gr.A, SA299 Gr.B .
Key words: ASME SA299, ASME SA299 carbon steel material, ASME SA299 stock, ASME SA299 competitive price, ASME SA299 high quality, ASME SA299 best service, ASME SA299 responsible supplier, ASME SA299 good manufacturer
Standard: ASME SA299/ SA299M
Thickness :1.5mm -260mm
Width :1000mm-4000mm
Length :1000mm-18000mm
MOQ: 1 PC
Product type : Steel plate
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月18日星期二
NiMo28 steel
Corrosion resistant alloy: NiMo28
NiMo28 alloy equal material:
Germany grade: W.Nr.2.46 American grade: UNS N10665 ISO grade: NiMo28
NiMo28 alloy steel Characteristic :
1.control iron and chromium in the lowest content, prevent the generation of β phase Ni4Mo28
2.The excellent corrosion resistance to reduction environment.Sulfuric acid anti medium concentration
3 excellent non oxidative acid corrosion
4.very good resistance to chloride ion reduction to stress corrosion cracking (SCC)
5.Capacity of excellent resistance to various organic acid corrosion
NiMo28 Corrosion resistant alloy steel Property ：
NiMo28 steel material density: 8.9g/cm3
NiMo28 steel material Melting temperature range: 1330-1380 degree
NiMo28 alloy steel Processing and heat treatment：
1.Should be quickly heated to a required temperature. The temperature range of 1160 - 900 degree heat processing.
2.The degree of deformation, the alloy grain size and forging the final forging temperature is closely related to.
3.Welding slag surrounding oxide, alloy surface oxide color and weld attachment than stainless steel, grinding and recommend the use of fine grain or fine grain grinding wheel abrasive belt.
4.Alloy should be machined after annealing, due to the work hardening material rate is higher, it should adopt the cutting speed than standard austenitic stainless steel low alloy processing low and heavy feed processing, can cut into the cold work hardening of the surface below.
NiMo28 alloy steel application:
1. manufacturing work under high temperature bolt; gas turbine rotor blades, impeller and other structural parts;
2. rocket engine thrust chamber;Reverse thrust device
3. on the plane;
4. large high pressure vessel;
5.The elastic gas seal, sealing sheet, rubber machinery electric blade.
Key words: NiMo28 stock, NiMo28 competitive price, NiMo28 high quality, NiMo28 supplier, NiMo28 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Corrosion resistant alloy: NiMo28
NiMo28 alloy equal material:
Germany grade: W.Nr.2.46 American grade: UNS N10665 ISO grade: NiMo28
NiMo28 alloy steel Characteristic :
1.control iron and chromium in the lowest content, prevent the generation of β phase Ni4Mo28
2.The excellent corrosion resistance to reduction environment.Sulfuric acid anti medium concentration
3 excellent non oxidative acid corrosion
4.very good resistance to chloride ion reduction to stress corrosion cracking (SCC)
5.Capacity of excellent resistance to various organic acid corrosion
NiMo28 Corrosion resistant alloy steel Property ：
NiMo28 steel material density: 8.9g/cm3
NiMo28 steel material Melting temperature range: 1330-1380 degree
NiMo28 alloy steel Processing and heat treatment：
1.Should be quickly heated to a required temperature. The temperature range of 1160 - 900 degree heat processing.
2.The degree of deformation, the alloy grain size and forging the final forging temperature is closely related to.
3.Welding slag surrounding oxide, alloy surface oxide color and weld attachment than stainless steel, grinding and recommend the use of fine grain or fine grain grinding wheel abrasive belt.
4.Alloy should be machined after annealing, due to the work hardening material rate is higher, it should adopt the cutting speed than standard austenitic stainless steel low alloy processing low and heavy feed processing, can cut into the cold work hardening of the surface below.
NiMo28 alloy steel application:
1. manufacturing work under high temperature bolt; gas turbine rotor blades, impeller and other structural parts;
2. rocket engine thrust chamber;Reverse thrust device
3. on the plane;
4. large high pressure vessel;
5.The elastic gas seal, sealing sheet, rubber machinery electric blade.
Key words: NiMo28 stock, NiMo28 competitive price, NiMo28 high quality, NiMo28 supplier, NiMo28 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Hastelloy B-2( W.Nr.2.46,NiMo28,UNS N10665)
Corrosion resistant alloy: Hastelloy B-2
Hastelloy B-2 alloy equal material:
Germany grade: W.Nr.2.46 DIN grade: NiMo28 American grade: UNS N10665 ISO grade: NiMo28
Hastelloy B-2 alloy steel Characteristic :
1.control iron and chromium in the lowest content, prevent the generation of β phase Ni4Mo28
2.The excellent corrosion resistance to reduction environment.Sulfuric acid anti medium concentration
3 excellent non oxidative acid corrosion
4.very good resistance to chloride ion reduction to stress corrosion cracking (SCC)
5.Capacity of excellent resistance to various organic acid corrosion
Hastelloy B-2 Corrosion resistant alloy steel Property ：
Hastelloy B-2 steel material density: 8.9g/cm3
Hastelloy B-2 steel material Melting temperature range: 1330-1380 degree
Hastelloy B-2 alloy steel Processing and heat treatment：
1.Should be quickly heated to a required temperature. The temperature range of 1160 - 900 degree heat processing.
2.The degree of deformation, the alloy grain size and forging the final forging temperature is closely related to.
3.Welding slag surrounding oxide, alloy surface oxide color and weld attachment than stainless steel, grinding and recommend the use of fine grain or fine grain grinding wheel abrasive belt.
4.Alloy should be machined after annealing, due to the work hardening material rate is higher, it should adopt the cutting speed than standard austenitic stainless steel low alloy processing low and heavy feed processing, can cut into the cold work hardening of the surface below.
Hastelloy B-2 alloy steel application:
1. manufacturing work under high temperature bolt; gas turbine rotor blades, impeller and other structural parts;
2. rocket engine thrust chamber;Reverse thrust device
3. on the plane;
4. large high pressure vessel;
5.The elastic gas seal, sealing sheet, rubber machinery electric blade.
Key words: Hastelloy B-2 stock, Hastelloy B-2 competitive price, Hastelloy B-2 high quality, Hastelloy B-2 supplier, Hastelloy B-2 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Corrosion resistant alloy: Hastelloy B-2
Hastelloy B-2 alloy equal material:
Germany grade: W.Nr.2.46 DIN grade: NiMo28 American grade: UNS N10665 ISO grade: NiMo28
Hastelloy B-2 alloy steel Characteristic :
1.control iron and chromium in the lowest content, prevent the generation of β phase Ni4Mo28
2.The excellent corrosion resistance to reduction environment.Sulfuric acid anti medium concentration
3 excellent non oxidative acid corrosion
4.very good resistance to chloride ion reduction to stress corrosion cracking (SCC)
5.Capacity of excellent resistance to various organic acid corrosion
Hastelloy B-2 Corrosion resistant alloy steel Property ：
Hastelloy B-2 steel material density: 8.9g/cm3
Hastelloy B-2 steel material Melting temperature range: 1330-1380 degree
Hastelloy B-2 alloy steel Processing and heat treatment：
1.Should be quickly heated to a required temperature. The temperature range of 1160 - 900 degree heat processing.
2.The degree of deformation, the alloy grain size and forging the final forging temperature is closely related to.
3.Welding slag surrounding oxide, alloy surface oxide color and weld attachment than stainless steel, grinding and recommend the use of fine grain or fine grain grinding wheel abrasive belt.
4.Alloy should be machined after annealing, due to the work hardening material rate is higher, it should adopt the cutting speed than standard austenitic stainless steel low alloy processing low and heavy feed processing, can cut into the cold work hardening of the surface below.
Hastelloy B-2 alloy steel application:
1. manufacturing work under high temperature bolt; gas turbine rotor blades, impeller and other structural parts;
2. rocket engine thrust chamber;Reverse thrust device
3. on the plane;
4. large high pressure vessel;
5.The elastic gas seal, sealing sheet, rubber machinery electric blade.
Key words: Hastelloy B-2 stock, Hastelloy B-2 competitive price, Hastelloy B-2 high quality, Hastelloy B-2 supplier, Hastelloy B-2 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
sell UNS N10001 steel
Corrosion resistant alloy: UNS N10001
Equal material : Hastelloy B
UNS N10001 Corrosion resistant alloy Characteristic :
(1)control of iron and chromium in the lowest content, prevent the generation of β phase Ni4Mo. (2)The excellent corrosion resistance to reduction environment.Sulfuric acid anti medium concentration
(3)excellent and many non oxidative acid corrosion. (4)very good resistance to chloride ion reduction to stress corrosion cracking (SCC). (5)Capacity of excellent resistance to various organic acid corrosion.
UNS N10001 alloy steel physici composition：
UNS N10001 alloy density：9.24g/cm
UNS N10001 alloy steel Melting temperature range：1330-1380 degree
UNS N10001 alloy Field of application:
For example :
(1)manufacturing work under high temperature bolt; gas turbine rotor blades, impeller and other structural parts; (2)rocket engine thrust chamber;Reverse thrust device
(3)on the plane; (4)large high pressure vessel; (5)The elastic gas seal, sealing sheet, rubber machinery electric blade.
Key words: UNS N10001 stock, UNS N10001 competitive price, UNS N10001 high quality, UNS N10001 supplier, UNS N10001 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Corrosion resistant alloy: UNS N10001
Equal material : Hastelloy B
UNS N10001 Corrosion resistant alloy Characteristic :
(1)control of iron and chromium in the lowest content, prevent the generation of β phase Ni4Mo. (2)The excellent corrosion resistance to reduction environment.Sulfuric acid anti medium concentration
(3)excellent and many non oxidative acid corrosion. (4)very good resistance to chloride ion reduction to stress corrosion cracking (SCC). (5)Capacity of excellent resistance to various organic acid corrosion.
UNS N10001 alloy steel physici composition：
UNS N10001 alloy density：9.24g/cm
UNS N10001 alloy steel Melting temperature range：1330-1380 degree
UNS N10001 alloy Field of application:
For example :
(1)manufacturing work under high temperature bolt; gas turbine rotor blades, impeller and other structural parts; (2)rocket engine thrust chamber;Reverse thrust device
(3)on the plane; (4)large high pressure vessel; (5)The elastic gas seal, sealing sheet, rubber machinery electric blade.
Key words: UNS N10001 stock, UNS N10001 competitive price, UNS N10001 high quality, UNS N10001 supplier, UNS N10001 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Hastelloy B( UNS N10001) steel
Corrosion resistant alloy: Hastelloy B
Equal material : UNS N10001
Hastelloy B Corrosion resistant alloy Characteristic :
control of iron and chromium in the lowest content, prevent the generation of β phase Ni4Mo. The excellent corrosion resistance to reduction environment.Sulfuric acid anti medium concentration
excellent and many non oxidative acid corrosion. very good resistance to chloride ion reduction to stress corrosion cracking (SCC). Capacity of excellent resistance to various organic acid corrosion.
Hastelloy B alloy steel physici composition：
Hastelloy B alloy density：9.24g/cm
Hastelloy B alloy steel Melting temperature range：1330-1380 degree
Hastelloy B alloy Field of application:
For example :
manufacturing work under high temperature bolt; gas turbine rotor blades, impeller and other structural parts; rocket engine thrust chamber;Reverse thrust device
on the plane; large high pressure vessel; The elastic gas seal, sealing sheet, rubber machinery electric blade.
Key words: Hastelloy B stock, Hastelloy B competitive price, Hastelloy B high quality, Hastelloy B supplier, Hastelloy B manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Corrosion resistant alloy: Hastelloy B
Equal material : UNS N10001
Hastelloy B Corrosion resistant alloy Characteristic :
control of iron and chromium in the lowest content, prevent the generation of β phase Ni4Mo. The excellent corrosion resistance to reduction environment.Sulfuric acid anti medium concentration
excellent and many non oxidative acid corrosion. very good resistance to chloride ion reduction to stress corrosion cracking (SCC). Capacity of excellent resistance to various organic acid corrosion.
Hastelloy B alloy steel physici composition：
Hastelloy B alloy density：9.24g/cm
Hastelloy B alloy steel Melting temperature range：1330-1380 degree
Hastelloy B alloy Field of application:
For example :
manufacturing work under high temperature bolt; gas turbine rotor blades, impeller and other structural parts; rocket engine thrust chamber;Reverse thrust device
on the plane; large high pressure vessel; The elastic gas seal, sealing sheet, rubber machinery electric blade.
Key words: Hastelloy B stock, Hastelloy B competitive price, Hastelloy B high quality, Hastelloy B supplier, Hastelloy B manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
sell UNS N10675 steel
UNS N10675 Wrought nickel-base superalloy
UNS N10675 alloy Equal material : NS3203, Hastelloy B - 3 , 2.4600
UNS N10675 alloy main description:
UNS N10675 alloy is a kind of nickel molybdenum alloy , it is for any temperature and concentration of hydrochloric acid has excellent corrosion resistance. At the same time it to sulfuric acid, acetic acid, formic acid, phosphoric acid and other oxidizing medium also has good corrosion resistance.
.UNS N10675 alloy Specification:
Forgings, bar, sheet, strip, ring parts, wire, bolt, spring, such as negotiating supply, according to the customer request production
UNS N10675 Application:
UNS N10675 alloy can be used in the previous 2 B is all purposes. As with B - 2 alloy, B - 3 is not recommended to trivalent iron salts and environment of the existence of bivalence copper salt, because these salt can quickly cause corrosion damage. When hydrochloric acid comes into contact with the iron and copper, will react to generate trivalent iron salts and bivalence copper salt.
UNS N10675 Scope of application areas :
UNS N10675 widely used in the chemical, petrochemical, energy production and has been widely used in pollution control areas, especially in the sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid, and other industries.
UNS N10675 Alloy has the following features:
The excellent corrosion resistance of reductive environment.
Excellent resistance to corrosive medium concentration of sulfuric acid and much non oxidizing acid.
Good resistance ability of various kinds of organic acid corrosion.
UNS N10675 Heat treatment
Unless the customer special requirements, all UNS N10675 alloy forgings are solid solution heat treatment state supply. B - the temperature of the alloy is 1065 ℃ and then quenched quickly. Sheet or wire for bright annealing, the heating temperature is 1150 ℃, then cooling in the hydrogen.
UNS N10675 Physical properties
UNS N10675 alloy density: 2.1 to 9.22 g/cm3
UNS N10675 Melting point: 1418 degree
UNS N10675 Hardness: 2.5 HB94
UNS N10675 alloy Mechanical properties of the minimum 2.8
Key words: UNS N10675 stock, UNS N10675 competitive price, UNS N10675 high quality, UNS N10675 supplier, UNS N10675 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
UNS N10675 Wrought nickel-base superalloy
UNS N10675 alloy Equal material : NS3203, Hastelloy B - 3 , 2.4600
UNS N10675 alloy main description:
UNS N10675 alloy is a kind of nickel molybdenum alloy , it is for any temperature and concentration of hydrochloric acid has excellent corrosion resistance. At the same time it to sulfuric acid, acetic acid, formic acid, phosphoric acid and other oxidizing medium also has good corrosion resistance.
.UNS N10675 alloy Specification:
Forgings, bar, sheet, strip, ring parts, wire, bolt, spring, such as negotiating supply, according to the customer request production
UNS N10675 Application:
UNS N10675 alloy can be used in the previous 2 B is all purposes. As with B - 2 alloy, B - 3 is not recommended to trivalent iron salts and environment of the existence of bivalence copper salt, because these salt can quickly cause corrosion damage. When hydrochloric acid comes into contact with the iron and copper, will react to generate trivalent iron salts and bivalence copper salt.
UNS N10675 Scope of application areas :
UNS N10675 widely used in the chemical, petrochemical, energy production and has been widely used in pollution control areas, especially in the sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid, and other industries.
UNS N10675 Alloy has the following features:
The excellent corrosion resistance of reductive environment.
Excellent resistance to corrosive medium concentration of sulfuric acid and much non oxidizing acid.
Good resistance ability of various kinds of organic acid corrosion.
UNS N10675 Heat treatment
Unless the customer special requirements, all UNS N10675 alloy forgings are solid solution heat treatment state supply. B - the temperature of the alloy is 1065 ℃ and then quenched quickly. Sheet or wire for bright annealing, the heating temperature is 1150 ℃, then cooling in the hydrogen.
UNS N10675 Physical properties
UNS N10675 alloy density: 2.1 to 9.22 g/cm3
UNS N10675 Melting point: 1418 degree
UNS N10675 Hardness: 2.5 HB94
UNS N10675 alloy Mechanical properties of the minimum 2.8
Key words: UNS N10675 stock, UNS N10675 competitive price, UNS N10675 high quality, UNS N10675 supplier, UNS N10675 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月17日星期一
NS3203 steel
NS3203 Wrought nickel-base superalloy
NS3203 alloy Equal material : Hastelloy B - 3, UNS N10675, 2.4600
.NS3203 alloy main description:
NS3203 alloy is a kind of nickel molybdenum alloy , it is for any temperature and concentration of hydrochloric acid has excellent corrosion resistance. At the same time it to sulfuric acid, acetic acid, formic acid, phosphoric acid and other oxidizing medium also has good corrosion resistance.
NS3203 alloy Specification:
Forgings, bar, sheet, strip, ring parts, wire, bolt, spring, such as negotiating supply, according to the customer request production
NS3203 Application:
NS3203 alloy can be used in the previous 2 B is all purposes. As with B - 2 alloy, B - 3 is not recommended to trivalent iron salts and environment of the existence of bivalence copper salt, because these salt can quickly cause corrosion damage. When hydrochloric acid comes into contact with the iron and copper, will react to generate trivalent iron salts and bivalence copper salt.
NS3203 Scope of application areas :
NS3203 widely used in the chemical, petrochemical, energy production and has been widely used in pollution control areas, especially in the sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid, and other industries.
NS3203 Alloy has the following features:
The excellent corrosion resistance of reductive environment.
Excellent resistance to corrosive medium concentration of sulfuric acid and much non oxidizing acid.
Good resistance ability of various kinds of organic acid corrosion.
.NS3203 Heat treatment
Unless the customer special requirements, all NS3203 alloy forgings are solid solution heat treatment state supply. NS3203 the temperature of the alloy is 1065 ℃ and then quenched quickly. Sheet or wire for bright annealing, the heating temperature is 1150 ℃, then cooling in the hydrogen.
NS3203 Physical properties
NS3203 alloy density: 2.1 to 9.22 g/cm3
NS3203 Melting point: 1418 degree
NS3203 Hardness: 2.5 HB94
NS3203 alloy Mechanical properties of the minimum 2.8
Key words:NS3203 stock,NS3203 competitive price, NS3203 high quality, NS3203 supplier, NS3203 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
NS3203 Wrought nickel-base superalloy
NS3203 alloy Equal material : Hastelloy B - 3, UNS N10675, 2.4600
.NS3203 alloy main description:
NS3203 alloy is a kind of nickel molybdenum alloy , it is for any temperature and concentration of hydrochloric acid has excellent corrosion resistance. At the same time it to sulfuric acid, acetic acid, formic acid, phosphoric acid and other oxidizing medium also has good corrosion resistance.
NS3203 alloy Specification:
Forgings, bar, sheet, strip, ring parts, wire, bolt, spring, such as negotiating supply, according to the customer request production
NS3203 Application:
NS3203 alloy can be used in the previous 2 B is all purposes. As with B - 2 alloy, B - 3 is not recommended to trivalent iron salts and environment of the existence of bivalence copper salt, because these salt can quickly cause corrosion damage. When hydrochloric acid comes into contact with the iron and copper, will react to generate trivalent iron salts and bivalence copper salt.
NS3203 Scope of application areas :
NS3203 widely used in the chemical, petrochemical, energy production and has been widely used in pollution control areas, especially in the sulfuric acid, hydrochloric acid, phosphoric acid, acetic acid, and other industries.
NS3203 Alloy has the following features:
The excellent corrosion resistance of reductive environment.
Excellent resistance to corrosive medium concentration of sulfuric acid and much non oxidizing acid.
Good resistance ability of various kinds of organic acid corrosion.
.NS3203 Heat treatment
Unless the customer special requirements, all NS3203 alloy forgings are solid solution heat treatment state supply. NS3203 the temperature of the alloy is 1065 ℃ and then quenched quickly. Sheet or wire for bright annealing, the heating temperature is 1150 ℃, then cooling in the hydrogen.
NS3203 Physical properties
NS3203 alloy density: 2.1 to 9.22 g/cm3
NS3203 Melting point: 1418 degree
NS3203 Hardness: 2.5 HB94
NS3203 alloy Mechanical properties of the minimum 2.8
Key words:NS3203 stock,NS3203 competitive price, NS3203 high quality, NS3203 supplier, NS3203 manufacturer.
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell UNS N05500 steel
Corrosion resistant alloy UNS N05500
UNS N05500 Equal material :
Monle K-500
UNS N05500 main description:
Monle K-500 is also called UNS N05500, and Alloy with 400 identical corrosion resistance, but has higher mechanical strength and hardness. UNS N05500 alloy steel Has good heat resistance and long term stability.
Key words: Monle K-500 stock, Monle K-500 competitive price, Monle K-500 high quality, Monle K-500 supplier, Monle K-500 manufacturer.
UNS N05500 alloy steel apply range:
Aviation, shipbuilding, chemical equipment
UNS N05500 Corrosion resistant alloy application field :Mainly used in the manufacture of aviation engine operating temperature at turbine vane and turbine blade under 750 degree ; used for fasteners, spring manufacturing ship pump, valve parts; chemical equipment; papermaking equipment the pulp scraping blade.
.UNS N05500 physical property:
UNS N05500 alloy density: 8.05g/cm3
UNS N05500 alloy steel Melting temperature range: 1288-1343 degree
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Corrosion resistant alloy UNS N05500
UNS N05500 Equal material :
Monle K-500
UNS N05500 main description:
Monle K-500 is also called UNS N05500, and Alloy with 400 identical corrosion resistance, but has higher mechanical strength and hardness. UNS N05500 alloy steel Has good heat resistance and long term stability.
Key words: Monle K-500 stock, Monle K-500 competitive price, Monle K-500 high quality, Monle K-500 supplier, Monle K-500 manufacturer.
UNS N05500 alloy steel apply range:
Aviation, shipbuilding, chemical equipment
UNS N05500 Corrosion resistant alloy application field :Mainly used in the manufacture of aviation engine operating temperature at turbine vane and turbine blade under 750 degree ; used for fasteners, spring manufacturing ship pump, valve parts; chemical equipment; papermaking equipment the pulp scraping blade.
.UNS N05500 physical property:
UNS N05500 alloy density: 8.05g/cm3
UNS N05500 alloy steel Melting temperature range: 1288-1343 degree
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell Monle K-500（UNS N05500）steel
Corrosion resistant alloy Monle K-500
Monle K-500 Equal material :
UNS N05500
.Monle K-500 main description:
Monle K-500 is also called UNS N05500, and Alloy with 400 identical corrosion resistance, but has higher mechanical strength and hardness. Monle K-500 alloy steel Has good heat resistance and long term stability.
Key words: Monle K-500 stock, Monle K-500 competitive price, Monle K-500 high quality, Monle K-500 supplier, Monle K-500 manufacturer.
5. Monle K-500 alloy steel apply range:
Aviation, shipbuilding, chemical equipment
Monle K-500 Corrosion resistant alloy application field :Mainly used in the manufacture of aviation engine operating temperature at turbine vane and turbine blade under 750 degree ; used for fasteners, spring manufacturing ship pump, valve parts; chemical equipment; papermaking equipment the pulp scraping blade.
Monle K-500 physical property:
Monle K-500 alloy density: 8.05g/cm3
Monle K-500 alloy steel Melting temperature range: 1288-1343 degree
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Corrosion resistant alloy Monle K-500
Monle K-500 Equal material :
UNS N05500
.Monle K-500 main description:
Monle K-500 is also called UNS N05500, and Alloy with 400 identical corrosion resistance, but has higher mechanical strength and hardness. Monle K-500 alloy steel Has good heat resistance and long term stability.
Key words: Monle K-500 stock, Monle K-500 competitive price, Monle K-500 high quality, Monle K-500 supplier, Monle K-500 manufacturer.
5. Monle K-500 alloy steel apply range:
Aviation, shipbuilding, chemical equipment
Monle K-500 Corrosion resistant alloy application field :Mainly used in the manufacture of aviation engine operating temperature at turbine vane and turbine blade under 750 degree ; used for fasteners, spring manufacturing ship pump, valve parts; chemical equipment; papermaking equipment the pulp scraping blade.
Monle K-500 physical property:
Monle K-500 alloy density: 8.05g/cm3
Monle K-500 alloy steel Melting temperature range: 1288-1343 degree
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade 690 steel
A709 Grade 690 Structural steel
A709 Grade 690 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS100W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 690,ASTM A709 Grade 690,A709 Grade 690Structural steel , ASTM A709 Grade 690 Structural steel for bridge, A709 Grade 690 stock, A709 Grade 690 competitive price, A709 Grade 690 high quality, A709 Grade 690 supplier, A709 Grade 690 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
A709 Grade 690 Structural steel
A709 Grade 690 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS100W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 690,ASTM A709 Grade 690,A709 Grade 690Structural steel , ASTM A709 Grade 690 Structural steel for bridge, A709 Grade 690 stock, A709 Grade 690 competitive price, A709 Grade 690 high quality, A709 Grade 690 supplier, A709 Grade 690 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade 485 steel
A709 Grade 485 Structural steel
A709 Grade485 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade485 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 485,ASTM A709 Grade 485,A709 Grade 485Structural steel , ASTM A709 Grade485 Structural steel for bridge, A709 Grade 485 stock, A709 Grade 485 competitive price, A709 Grade 485 high quality, A709 Grade 485 supplier, A709 Grade 485 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
A709 Grade 485 Structural steel
A709 Grade485 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade485 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 485,ASTM A709 Grade 485,A709 Grade 485Structural steel , ASTM A709 Grade485 Structural steel for bridge, A709 Grade 485 stock, A709 Grade 485 competitive price, A709 Grade 485 high quality, A709 Grade 485 supplier, A709 Grade 485 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月16日星期日
Sell A709 Grade 345 steel
ASTM A709 Grade 345 Structural steel
Key words:A709 Grade 345,ASTM A709 Grade 345,A709 Grade345 Structural steel , ASTM A709 Grade 345 Structural steel for bridge
A709 Grade345 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade345 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 345,ASTM A709 Grade 345,A709 Grade345 Structural steel , ASTM A709 Grade 345 Structural steel for bridge, A709 Grade 345 stock, A709 Grade 345 competitive price, A709 Grade 345 high quality, A709 Grade 345 supplier, A709 Grade 345 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASTM A709 Grade 345 Structural steel
Key words:A709 Grade 345,ASTM A709 Grade 345,A709 Grade345 Structural steel , ASTM A709 Grade 345 Structural steel for bridge
A709 Grade345 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade345 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 345,ASTM A709 Grade 345,A709 Grade345 Structural steel , ASTM A709 Grade 345 Structural steel for bridge, A709 Grade 345 stock, A709 Grade 345 competitive price, A709 Grade 345 high quality, A709 Grade 345 supplier, A709 Grade 345 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade 250 steel
ASTM A709 Grade 250 Structural steel
A709 Grade250 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade250 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 250,ASTM A709 Grade 250,A709 Grade250 Structural steel , ASTM A709 Grade 250 Structural steel for bridge, A709 Grade 250 stock, A709 Grade 250 competitive price, A709 Grade 250 high quality, A709 Grade 250 supplier, A709 Grade 250 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASTM A709 Grade 250 Structural steel
A709 Grade250 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade250 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 250,ASTM A709 Grade 250,A709 Grade250 Structural steel , ASTM A709 Grade 250 Structural steel for bridge, A709 Grade 250 stock, A709 Grade 250 competitive price, A709 Grade 250 high quality, A709 Grade 250 supplier, A709 Grade 250 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade HPS 100W steel
A709 Grade HPS 100W Structural steel
A709 GradeHPS100W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS100W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade HPS100W,ASTMA709 Grade HPS 100W,A709 Grade HPS100WStructural steel , ASTM A709 GradeHPS 100W Structural steel for bridge, A709 Grade HPS 100W stock, A709 Grade HPS 100W competitive price, A709 Grade HPS 100W high quality, A709 Grade HPS 100W supplier, A709 Grade HPS 100W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
A709 Grade HPS 100W Structural steel
A709 GradeHPS100W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS100W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade HPS100W,ASTMA709 Grade HPS 100W,A709 Grade HPS100WStructural steel , ASTM A709 GradeHPS 100W Structural steel for bridge, A709 Grade HPS 100W stock, A709 Grade HPS 100W competitive price, A709 Grade HPS 100W high quality, A709 Grade HPS 100W supplier, A709 Grade HPS 100W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade HPS 70W steel
A709 Grade HPS 70W Structural steel
A709 GradeHPS70W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS70W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade HPS70W,ASTM A709 Grade HPS 70W,A709 Grade HPS70WStructural steel , ASTM A709 HPS Grade 70W Structural steel for bridge, A709 Grade HPS 70W stock, A709 Grade HPS 70W competitive price, A709 Grade HPS 70W high quality, A709 Grade HPS 70W supplier, A709 Grade HPS 70W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
A709 Grade HPS 70W Structural steel
A709 GradeHPS70W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS70W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade HPS70W,ASTM A709 Grade HPS 70W,A709 Grade HPS70WStructural steel , ASTM A709 HPS Grade 70W Structural steel for bridge, A709 Grade HPS 70W stock, A709 Grade HPS 70W competitive price, A709 Grade HPS 70W high quality, A709 Grade HPS 70W supplier, A709 Grade HPS 70W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade HPS 50W steel
A709 Grade HPS 50W Structural steel
A709 GradeHPS50W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS50W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade HPS50W,ASTM A709 Grade HPS 50W,A709 Grade HPS50WStructural steel , ASTM A709 GradeHPS 50W Structural steel for bridge, A709 Grade HPS 50W stock, A709 Grade HPS 50W competitive price, A709 Grade HPS 50W high quality, A709 Grade HPS 50W supplier, A709 Grade HPS 50W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
A709 Grade HPS 50W Structural steel
A709 GradeHPS50W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS50W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade HPS50W,ASTM A709 Grade HPS 50W,A709 Grade HPS50WStructural steel , ASTM A709 GradeHPS 50W Structural steel for bridge, A709 Grade HPS 50W stock, A709 Grade HPS 50W competitive price, A709 Grade HPS 50W high quality, A709 Grade HPS 50W supplier, A709 Grade HPS 50W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月13日星期四
Sell A709 Grade HPS 50W steel
A709 Grade HPS 50W Structural steel
A709 GradeHPS50W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS50W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade HPS50W,ASTM A709 Grade HPS 50W,A709 Grade HPS50WStructural steel , ASTM A709 GradeHPS 50W Structural steel for bridge, A709 Grade HPS 50W stock, A709 Grade HPS 50W competitive price, A709 Grade HPS 50W high quality, A709 Grade HPS 50W supplier, A709 Grade HPS 50W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
A709 Grade HPS 50W Structural steel
A709 GradeHPS50W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeHPS50W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade HPS50W,ASTM A709 Grade HPS 50W,A709 Grade HPS50WStructural steel , ASTM A709 GradeHPS 50W Structural steel for bridge, A709 Grade HPS 50W stock, A709 Grade HPS 50W competitive price, A709 Grade HPS 50W high quality, A709 Grade HPS 50W supplier, A709 Grade HPS 50W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade 50W steel
ASTM A709 Grade 50W Structural steel
A709 Grade50W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade50W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 50W,ASTM A709 Grade 50W,A709 Grade50WStructural steel , ASTM A709 Grade 50W Structural steel for bridge, A709 Grade 50W stock, A709 Grade 50W competitive price, A709 Grade 50W high quality, A709 Grade 50W supplier, A709 Grade 50W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASTM A709 Grade 50W Structural steel
A709 Grade50W Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade50W steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 50W,ASTM A709 Grade 50W,A709 Grade50WStructural steel , ASTM A709 Grade 50W Structural steel for bridge, A709 Grade 50W stock, A709 Grade 50W competitive price, A709 Grade 50W high quality, A709 Grade 50W supplier, A709 Grade 50W manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade 50S steel
ASTM A709 Grade 50S Structural steel
Grade 50S Structural steel for bridge
A709 Grade50S Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade50S steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 50S,ASTM A709 Grade 50S,A709 Grade50S Structural steel , A709 Grade 50S stock, A709 Grade 50S competitive price, A709 Grade 50S high quality, A709 Grade 50S supplier, A709 Grade 50S manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASTM A709 Grade 50S Structural steel
Grade 50S Structural steel for bridge
A709 Grade50S Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade50S steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 50S,ASTM A709 Grade 50S,A709 Grade50S Structural steel , A709 Grade 50S stock, A709 Grade 50S competitive price, A709 Grade 50S high quality, A709 Grade 50S supplier, A709 Grade 50S manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade 50 steel
ASTM A709 Grade 50 Structural steel
A709 Grade50 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade50 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 50,ASTM A709 Grade 50,A709 Grade50 Structural steel , ASTM A709 Grade 50 Structural steel for bridge, A709 Grade 50 stock, A709 Grade 50 competitive price, A709 Grade 50 high quality, A709 Grade 50 supplier, A709 Grade 50 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
ASTM A709 Grade 50 Structural steel
A709 Grade50 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons Grade50 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:A709 Grade 50,ASTM A709 Grade 50,A709 Grade50 Structural steel , ASTM A709 Grade 50 Structural steel for bridge, A709 Grade 50 stock, A709 Grade 50 competitive price, A709 Grade 50 high quality, A709 Grade 50 supplier, A709 Grade 50 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell A709 Grade 36 steel
A709 Grade 36 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeB steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: A709 Grade 36 stock, A709 Grade 36 competitive price, A709 Grade 36 high quality, A709 Grade 36 supplier, A709 Grade 36 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
A709 Grade 36 Main application:
Low alloy steel plates are used to manufacture the plants of factory ,bridge, the common constructure and construction machinery and equipment.
JW steel keeps more than 10,000 tons GradeB steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: A709 Grade 36 stock, A709 Grade 36 competitive price, A709 Grade 36 high quality, A709 Grade 36 supplier, A709 Grade 36 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月11日星期二
Sell x120 steel
API5L-X120 High strength pipeline steel
API 5L-X120 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X120 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X120 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X120steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X120,API5L-X120,X120Steel pipe,X120 pipe system steel,API 5L-X120 petroleum steel tube, X120 stock, X120 competitive price, X120 high quality, X120 supplier, X120 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X120 High strength pipeline steel
API 5L-X120 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X120 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X120 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X120steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X120,API5L-X120,X120Steel pipe,X120 pipe system steel,API 5L-X120 petroleum steel tube, X120 stock, X120 competitive price, X120 high quality, X120 supplier, X120 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell x100 steel
API5L-X100 High strength pipeline steel
API 5L-X100 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X100 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X100 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tonsX100 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X100,API5L-X100,X100Steel pipe,X100 pipe system steel,API 5L-X100 petroleum steel tube, X100 stock, X100 competitive price, X100 high quality, X100 supplier, X100 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X100 High strength pipeline steel
API 5L-X100 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X100 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X100 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tonsX100 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X100,API5L-X100,X100Steel pipe,X100 pipe system steel,API 5L-X100 petroleum steel tube, X100 stock, X100 competitive price, X100 high quality, X100 supplier, X100 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell x80 steel
API5L-X80 pipeline steel
API 5L-X80 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X80 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X80 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X80 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X80,API5L-X80,X80Steel pipe,X80 pipe system steel,API 5L-X80 petroleum steel tube, X80 stock, X80 competitive price, X80 high quality, X80 supplier, X80 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X80 pipeline steel
API 5L-X80 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X80 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X80 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X80 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X80,API5L-X80,X80Steel pipe,X80 pipe system steel,API 5L-X80 petroleum steel tube, X80 stock, X80 competitive price, X80 high quality, X80 supplier, X80 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell x70 steel
API5L-X70 pipeline steel
API 5L-X70 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X70 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X70 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X70 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X70,API5L-X70,X70 Steel pipe,X70 pipe system steel,API 5L-X70 petroleum steel tube, X70 stock, X70 competitive price, X70 high quality, X70 supplier, X70 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X70 pipeline steel
API 5L-X70 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X70 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X70 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X70 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X70,API5L-X70,X70 Steel pipe,X70 pipe system steel,API 5L-X70 petroleum steel tube, X70 stock, X70 competitive price, X70 high quality, X70 supplier, X70 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell x65 steel
API5L-X65 pipeline steel
API 5L-X65 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X65 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X65 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X65 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X65,API5L-X65,X65Steel pipe,X65 pipe system steel,API 5L-X65 petroleum steel tube, X65 stock, X65 competitive price, X65 high quality, X65 supplier, X65 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X65 pipeline steel
API 5L-X65 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X65 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X65 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X65 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X65,API5L-X65,X65Steel pipe,X65 pipe system steel,API 5L-X65 petroleum steel tube, X65 stock, X65 competitive price, X65 high quality, X65 supplier, X65 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell x60 steel
API5L-X60 pipeline steel
API 5L-X60 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X60 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X60 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X60 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X60,API5L-X60,X60 Steel pipe,X60 pipe system steel,API 5L-X60 petroleum steel tube, X60 stock, X60 competitive price, X60 high quality, X60 supplier, X60 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X60 pipeline steel
API 5L-X60 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X60 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X60 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X60 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X60,API5L-X60,X60 Steel pipe,X60 pipe system steel,API 5L-X60 petroleum steel tube, X60 stock, X60 competitive price, X60 high quality, X60 supplier, X60 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell x56 steel
API5L-X56 pipeline steel
API 5L-X56 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X56 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X56 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X56 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X56,API5L-X56,X56 Steel pipe,X56 pipe system steel,API 5L-X56petroleum steel tube, X56 stock, X56 competitive price, X56 high quality, X56 supplier, X56 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X56 pipeline steel
API 5L-X56 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X56 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X56 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X56 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X56,API5L-X56,X56 Steel pipe,X56 pipe system steel,API 5L-X56petroleum steel tube, X56 stock, X56 competitive price, X56 high quality, X56 supplier, X56 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell x52 steel
API5L-X52 pipeline steel
API 5L-X52 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X52 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X52 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X52 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X52,API5L-X52,X52 Steel pipe,X52 pipe system steel,API 5L-X52petroleum steel tube, X52 stock, X52 competitive price, X52 high quality, X52 supplier, X52 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X52 pipeline steel
API 5L-X52 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X52 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X52 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X52 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X52,API5L-X52,X52 Steel pipe,X52 pipe system steel,API 5L-X52petroleum steel tube, X52 stock, X52 competitive price, X52 high quality, X52 supplier, X52 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月10日星期一
Sell x46 steel
API5L-X46 pipeline steel
API 5L-X46 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X46 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X46 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X46 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X46,API5L-X46,X46 Steel pipe,X46 pipe system steel,API 5L-X46petroleum steel tube, X46 stock, X46 competitive price, X46 high quality, X46 supplier, X46 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X46 pipeline steel
API 5L-X46 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X46 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X46 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X46 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X46,API5L-X46,X46 Steel pipe,X46 pipe system steel,API 5L-X46petroleum steel tube, X46 stock, X46 competitive price, X46 high quality, X46 supplier, X46 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell x42 steel
API5L-X42 pipeline steel
API 5L-X42 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X42 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X42 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X42 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X42,API5L-X42,X42 Steel pipe,X42 pipe system steel,API 5L-X42 petroleum steel tube，X42 stock, X42 competitive price, X42 high quality, X42 supplier, X42 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L-X42 pipeline steel
API 5L-X42 petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-X42 petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-X42 is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons X42 steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:X42,API5L-X42,X42 Steel pipe,X42 pipe system steel,API 5L-X42 petroleum steel tube，X42 stock, X42 competitive price, X42 high quality, X42 supplier, X42 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell Grade B steel
API5L- Grade B pipeline steel
API 5L-Grade B petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-Grade B petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-Grade B is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons GradeB steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:GradeB,API5L-GradeB,GradeB Steel pipe,GradeB pipe system steel,API 5L-Grade B petroleum steel tube，Grade B stock, Grade B competitive price, Grade B high quality, Grade B supplier, Grade B manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
API5L- Grade B pipeline steel
API 5L-Grade B petroleum steel tube standard is widely used in petroleum, natural gas, coal gas, water supply, thermal power, steam heating, hydropower station, pressure steel pipe, thermal power, dredging engineering industry foundation engineering. API5l-Grade B petroleum steel pipe application is becoming more and more popular. For general large project or others, API5l-Grade B is an important part of the heavy industry base.
JW steel keeps more than 10,000 tons GradeB steel plates in stock each month. We can meet our customer’s any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words:GradeB,API5L-GradeB,GradeB Steel pipe,GradeB pipe system steel,API 5L-Grade B petroleum steel tube，Grade B stock, Grade B competitive price, Grade B high quality, Grade B supplier, Grade B manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SPHT4 steel
SPHT4 is suitable for general structural steel and engineering with hot rolled steel plates, steel belt, available for welded pipe, cold rolling materials, bicycle parts, as well as important welding, riveting, bolting artifacts.
JW steel keeps more than 10,000 tons SPHT4 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHT4 stock, SPHT4 competitive price, SPHT4 high quality, SPHT4 supplier, SPHT4 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
SPHT4 is suitable for general structural steel and engineering with hot rolled steel plates, steel belt, available for welded pipe, cold rolling materials, bicycle parts, as well as important welding, riveting, bolting artifacts.
JW steel keeps more than 10,000 tons SPHT4 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHT4 stock, SPHT4 competitive price, SPHT4 high quality, SPHT4 supplier, SPHT4 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SPHT3 steel
SPHT3 is suitable for general structural steel and engineering with hot rolled steel plates, steel belt, available for welded pipe, cold rolling materials, bicycle parts, as well as important welding, riveting, bolting artifacts.
JW steel keeps more than 10,000 tons SPHT3 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHT3 stock, SPHT3 competitive price, SPHT3 high quality, SPHT3 supplier, SPHT3 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
SPHT3 is suitable for general structural steel and engineering with hot rolled steel plates, steel belt, available for welded pipe, cold rolling materials, bicycle parts, as well as important welding, riveting, bolting artifacts.
JW steel keeps more than 10,000 tons SPHT3 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHT3 stock, SPHT3 competitive price, SPHT3 high quality, SPHT3 supplier, SPHT3 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
2014年11月9日星期日
Sell SPHT2 steel
SPHT2 is suitable for general structural steel and engineering with hot rolled steel plates, steel belt, available for welded pipe, cold rolling materials, bicycle parts, as well as important welding, riveting, bolting artifacts.
JW steel keeps more than 10,000 tons SPHT2 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHT2 stock, SPHT2 competitive price, SPHT2 high quality, SPHT2 supplier, SPHT2 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
SPHT2 is suitable for general structural steel and engineering with hot rolled steel plates, steel belt, available for welded pipe, cold rolling materials, bicycle parts, as well as important welding, riveting, bolting artifacts.
JW steel keeps more than 10,000 tons SPHT2 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHT2 stock, SPHT2 competitive price, SPHT2 high quality, SPHT2 supplier, SPHT2 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SPHT1 steel
SPHT1 is suitable for general structural steel and engineering with hot rolled steel plates, steel belt, available for welded pipe, cold rolling materials, bicycle parts, as well as important welding, riveting, bolting artifacts.
Key words: SPHT1 stock, SPHT1 competitive price, SPHT1 high quality, SPHT1 supplier, SPHT1 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
SPHT1 is suitable for general structural steel and engineering with hot rolled steel plates, steel belt, available for welded pipe, cold rolling materials, bicycle parts, as well as important welding, riveting, bolting artifacts.
Key words: SPHT1 stock, SPHT1 competitive price, SPHT1 high quality, SPHT1 supplier, SPHT1 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SPHE steel
SPHE applies to hot-rolled carbon steel sheet of commercial and drawing qualities.SPHE steel sheet is suitable for many applications where the presence of oxide or scale, or normal surface imperfections disclosed after removal of oxide or scale, are not objectionable. It is not suitable for applications where surface is of prime importance.
JW steel keeps more than 10,000 tons SPHE steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHE stock, SPHE competitive price, SPHE high quality, SPHE supplier, SPHE manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
SPHE applies to hot-rolled carbon steel sheet of commercial and drawing qualities.SPHE steel sheet is suitable for many applications where the presence of oxide or scale, or normal surface imperfections disclosed after removal of oxide or scale, are not objectionable. It is not suitable for applications where surface is of prime importance.
JW steel keeps more than 10,000 tons SPHE steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHE stock, SPHE competitive price, SPHE high quality, SPHE supplier, SPHE manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SPHD steel
SPHD applies to hot-rolled carbon steel sheet of commercial and drawing qualities.SPHC steel sheet is suitable for many applications where the presence of oxide or scale, or normal surface imperfections disclosed after removal of oxide or scale, are not objectionable. It is not suitable for applications where surface is of prime importance.
JW steel keeps more than 10,000 tons SPHDsteel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHD stock, SPHD competitive price, SPHD high quality, SPHD supplier, SPHD manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
SPHD applies to hot-rolled carbon steel sheet of commercial and drawing qualities.SPHC steel sheet is suitable for many applications where the presence of oxide or scale, or normal surface imperfections disclosed after removal of oxide or scale, are not objectionable. It is not suitable for applications where surface is of prime importance.
JW steel keeps more than 10,000 tons SPHDsteel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHD stock, SPHD competitive price, SPHD high quality, SPHD supplier, SPHD manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell SPHC steel
SPHC applies to hot-rolled carbon steel sheet of commercial and drawing qualities.SPHC steel sheet is suitable for many applications where the presence of oxide or scale, or normal surface imperfections disclosed after removal of oxide or scale, are not objectionable. It is not suitable for applications where surface is of prime importance.
JW steel keeps more than 10,000 tons SPHC steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHC stock, SPHC competitive price, SPHC high quality, SPHC supplier, SPHC manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
SPHC applies to hot-rolled carbon steel sheet of commercial and drawing qualities.SPHC steel sheet is suitable for many applications where the presence of oxide or scale, or normal surface imperfections disclosed after removal of oxide or scale, are not objectionable. It is not suitable for applications where surface is of prime importance.
JW steel keeps more than 10,000 tons SPHC steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: SPHC stock, SPHC competitive price, SPHC high quality, SPHC supplier, SPHC manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
Sell HR4 steel
HR4 applies to hot-rolled carbon steel sheet of commercial and drawing qualities.HR4 steel sheet is suitable for many applications where the presence of oxide or scale, or normal surface imperfections disclosed after removal of oxide or scale, are not objectionable. It is not suitable for applications where surface is of prime importance.
JW steel keeps more than 10,000 tons HR4 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: HR4 stock, HR4 competitive price, HR4 high quality, HR4 supplier, HR4 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
HR4 applies to hot-rolled carbon steel sheet of commercial and drawing qualities.HR4 steel sheet is suitable for many applications where the presence of oxide or scale, or normal surface imperfections disclosed after removal of oxide or scale, are not objectionable. It is not suitable for applications where surface is of prime importance.
JW steel keeps more than 10,000 tons HR4 steel plates in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure.
Key words: HR4 stock, HR4 competitive price, HR4 high quality, HR4 supplier, HR4 manufacturer.
Delivery time: Promptly (Stock) or 10-40 days (Production)
Stock : Available
MTC: Available
Payment Term : T/T or L/C At sight .
http://www.steel-jw.com
http://www.steel-plates.com
vivian@steel-jw.com
Skype: vivian@steel-jw.com
Tel 86, 371, 63332179
订阅：
评论 (Atom)